FortiMail


 

The following articles outline topics relating to FortiMail

Navigating the GUI 

System Settings and Administrative Options

Popular posts from this blog

Useful FortiGate CLI troubleshooting commands

Image
 The following commands can be useful when troubleshooting issues on a FortiGate firewall from the CLI: 1. execute tac report This command runs the majority of the key troubleshooting commands. It doesnt take long to complete and its non-impactful to the functionality of the FortiGate firewall. This command outputs a lot of text, so it is best to be recording your SSH session prior to running this command so that the output is easily viewable after. 2. get system status This command displays the versions of the FortiGates firmware, and FortiGuard engines. It also displays other useful system information such as platform and license status. 3. get system performance status This command displays CPU and memory states, average network usage, average sessions and session startup rate, virus's caught, IPS attacks blocked and uptime. In Multi-VDOM mode this command needs to be run in global configuration mode (config global, instead of config vdom) 4. diagnose sys top This command lists ...
Read more

FortiAP - Features for high-density deployments

In wireless networks it is the client that decides what AP and band it connects to, and there are no standardized ways that a AP / Controller can force a client to connect to a different AP. To get around these challenges FortiAPs can be configured to deploy the following: Enabling frequency band load-balancing In a high-density environment is important to make the best use of the two WiFi bands, 2.4 GHz and 5 GHz. The 5 GHz band has more non-overlapping channels and receives less interference from non-WiFi devices, but not all devices support it. Clients that are capable of 5 GHz operation should be encouraged to use 5 GHz rather than the 2.4 GHz band. To load-balance the WiFi bands, you enable Frequency Handoff in the FortiAP profile. In the FortiGate GUI, go to WiFi & Switch Controller > FortiAP Profiles and edit the relevant profile. Or, you can use the CLI: ...
Read more

NSE8 Lab Study Resources - Narbik CCIE R&S v5.1 Foundations

 Hey All, I have been working on putting together some scenarios for lab practice and I've found myself falling back on some of the study materials I used when preparing for the CCIE EI (yet to obtain, on the list after the NSE8). A legendary trainer in this area is Narbik Kocharians CCIE 12410 who is the president of Micronics Networking and Training - his CCIE prep courses and text books are considered almost required reading for any serious candidate for this certification. His text books work through hands on labs that are focused on specific topics to help cement the theory of the different topics in the exam.  His textbook CCIE Routing and Switching 5.1 Foundations: Bridging the Gap between CCNP and CCIE is well aimed at the skill level required of the NSE8 and fortunately there is actually quite a bit of overlap in its 1100 pages. The chapters within the textbook are: 1. Physical Topology 2. Physical and Logical Topologies 3. Spanning Tree Protocol 4. Point-to-Point Pro...
Read more